Preparation and performance of (Co,Mn)3O4 spinel coating on Crofer alloy by composite electrodeposition and step-heating thermal conversion

The preparation and performance improvement of the spinel coating on the surface of ferritic alloy is of wide interest for its application in the metallic interconnects of the solid oxide fuel cells (SOFCs). The Co Mn₂O₃ composite coating is prepared on the surface of the Crofer alloy by the composite electrodeposition method. A step-heating thermal conversion process is subsequently used to convert the composite coating into a spinel coating, while a direct-heating process is implemented as the control experiment. Isothermal oxidation tests are then carried out for the prepared samples in order to present the high temperature performance. Scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and area-specific resistance (ASR) are used to analyze the properties of the matrix and coatings. The experimental results reveal that the coatings by step-heating thermal conversion exhibit better performance of electrical conductivity and oxidation resistance than the coatings by direct-heating process. Furthermore, with the increase of oxidation time, the atomic proportion of Cr element diffusing to the surface of the matrix is maintained at about 3%–4% for the samples with spinel coatings by step heating, which effectively prevent the Cr volatilization in the matrix. The preparation of spinel coatings on the ferritic alloy by composite electrodeposition and step-heating thermal conversion is helpful to stimulate new ideas for the development of reliable and cost-effective metallic interconnect.     

Enhancement of uranium(VI) biomineralization by Saccharomyces cerevisiae through addition of inorganic phosphorus

Journal of Radioanalytical and Nuclear Chemistry - Enhancement of U(VI) biomineralization by Saccharomyces cerevisiae through addition of inorganic phosphorus was studied in this work. The addition...     

Extraction of uranium in caustic sludge from the production of nuclear fuel components by countercurrent dissolution and acid curing

Journal of Radioanalytical and Nuclear Chemistry - The uraniferous caustic sludge (UCS) produced in the production of uranium fuel components was hardly to leach directly, due to its very low-grade...     

Salt Metathesis: Tetrafluoroborate Anion Rapidly Fluoridates Organoboronic Acids to give Organotrifluoroborates

Tetrafluoroborate (BF₄⁻) has long been used as a spectator counter anion. Herein, we report an unprecedented salt metathesis between a variety of BF₄⁻ salts and a series of organoboronic acids yielding the corresponding organotrifluoroborates. We identified conditions for fast and efficient fluoridation (<1 h) with minimal workup. Fundamentally, this work discloses the proclivity of BF₄⁻ to exchange fluoride atoms with organoboronates, highlighting the lability of BF₄⁻.     

Manipulating OH−-Mediated Anode-Cathode Cross-Communication Toward Long-Life Aqueous Zinc-Vanadium Batteries

The anode-cathode interplay is an important but rarely considered factor that initiates the degradation of aqueous zinc ion batteries (AZIBs). Herein, to address the limited cyclability issue of V-based AZIBs, Al₂(SO₄)₃ is proposed as decent electrolyte additive to manipulate OH⁻-mediated cross-communication between Zn anode and NaV₃O₈ ⋅ 1.5H₂O (NVO) cathode. The hydrolysis of Al³⁺ creates a pH≈0.9 strong acidic environment, which unexpectedly prolongs the anode lifespan from 200 to 1000 h. Such impressive improvement is assigned to the alleviation of interfacial OH⁻ accumulation by Al³⁺ adsorption and solid electrolyte interphase formation. Accordingly, the strongly acidified electrolyte, associated with the sedated crossover of anodic OH⁻ toward NVO, remarkably mitigate its undesired dissolution and phase transition. The interrupted OH⁻-mediated communication between the two electrodes endows Zn||NVO batteries with superb cycling stability, at both low and high scan rates.     

Scalable Green Synthesis of Robust Ultra-Microporous Hofmann Clathrate Material with Record C3H6 Storage Density for Efficient C3H6/C3H8 Separation

Developing porous materials for C₃H₆/C₃H₈ separation faces the challenge of merging excellent separation performance with high stability and easy scalability of synthesis. Herein, we report a robust Hofmann clathrate material (ZJU-75a), featuring high-density strong binding sites to achieve all the above requirements. ZJU-75a adsorbs large amount of C₃H₆ with a record high storage density of 0.818 g mL⁻¹, and concurrently shows high C₃H₆/C₃H₈ selectivity (54.2) at 296 K and 1 bar. Single-crystal structure analysis unveil that the high-density binding sites in ZJU-75a not only provide much stronger interactions with C₃H₆ but also enable the dense packing of C₃H₆. Breakthrough experiments on gas mixtures afford both high separation factor of 14.7 and large C₃H₆ uptake (2.79 mmol g⁻¹). This material is highly stable and can be easily produced at kilogram-scale using a green synthesis method, making it as a benchmark material to address major challenges for industrial C₃H₆/C₃H₈ separation.     

Type I Photosensitizer Targeting G-Quadruplex RNA Elicits Augmented Immunity for Cancer Ablation

Type I photodynamic therapy (PDT) represents a promising treatment modality for tumors with intrinsic hypoxia. However, type I photosensitizers (PSs), especially ones with near infrared (NIR) absorption, are limited and their efficacy needs improvement via new targeting tactics. We develop a NIR type I PS by engineering acridinium derived donor-π-acceptor systems. The PS exhibits an exclusive type I PDT mechanism due to effective intersystem crossing and disfavored energy transfer to O₂, and shows selective binding to G-quadruplexes (G4s) via hydrogen bonds identified by a molecular docking study. Moreover, it enables fluorogenic detection of G4s and efficient O₂⋅⁻ production in hypoxic conditions, leading to immunogenic cell death and substantial variations of gene expression in RNA sequencing. Our strategy demonstrates augmented antitumor immunity for effective ablation of immunogenic cold tumor, highlighting its potential of RNA-targeted type I PDT in precision cancer therapy.     

Electronic Perturbation of Copper Single-Atom CO2 Reduction Catalysts in a Molecular Way

Fine-tuning electronic structures of single-atom catalysts (SACs) plays a crucial role in harnessing their catalytic activities, yet challenges remain at a molecular scale in a controlled fashion. By tailoring the structure of graphdiyne (GDY) with electron-withdrawing/-donating groups, we show herein the electronic perturbation of Cu single-atom CO₂ reduction catalysts in a molecular way. The elaborately introduced functional groups (−F, −H and −OMe) can regulate the valance state of Cu^δ+, which is found to be directly scaled with the selectivity of the electrochemical CO₂-to-CH₄ conversion. An optimum CH₄ Faradaic efficiency of 72.3 % was achieved over the Cu SAC on the F-substituted GDY. In situ spectroscopic studies and theoretical calculations revealed that the positive Cu^δ+ centers adjusted by the electron-withdrawing group decrease the pK_a of adsorbed H₂O, promoting the hydrogenation of intermediates toward the CH₄ production. Our strategy paves the way for precise electronic perturbation of SACs toward efficient electrocatalysis.     

Zincophilic Interfacial Manipulation against Dendrite Growth and Side Reactions for Stable Zn Metal Anodes

Constructing multifunctional interphases to suppress the rampant Zn dendrite growth and detrimental side reactions is crucial for Zn anodes. Herein, a phytic acid (PA)-ZnAl coordination compound is demonstrated as a versatile interphase layer to stabilize Zn anodes. The zincophilic PA-ZnAl layer can manipulate Zn²⁺ flux and promote rapid desolvation kinetics, ensuring the uniform Zn deposition with dendrite-free morphology. Moreover, the robust PA-ZnAl protective layer can effectively inhibit the hydrogen evolution reaction and formation of byproducts, further contributing to the reversible Zn plating/stripping with high Coulombic efficiency. As a result, the Zn@PA-ZnAl electrode shows a lower Zn nucleation overpotential and higher Zn²⁺ transference number compared with bare Zn. The Zn@PA-ZnAl symmetric cell exhibits a prolonged lifespan of 650 h tested at 5 mA cm⁻² and 5 mAh cm⁻². Furthermore, the assembled Zn battery full cell based on this Zn@PA-ZnAl anode also delivers decent cycling stability even under harsh conditions.